17VR-120D OPERATING MANUAL
Channel
Number
Pre-Programmed Frequency
0 0.520MHz (AM)
1 1.800MHz (AM)
2 3.600MHz (AM)
3 7.000MHz (AM)
4 10.500MHz (AM)
5 21.000MHz (AM)
6 50.500MHz (FM)
7 88.000MHz (WFM)
8 144.000MHz (FM)
9 430.000MHz (FM)
10 1240.000MHz (FM)
11 Weather Channels (WX-01 ~ WX-10)
12
Recalls Memory Group "0" (Memory Channels 800 - 831)
Rotate the DIAL knob to select one of the frequencies for the stations in
Memory Group 0.
Press the [MODE] key to view the actual frequency.
The Memory Group can be changed using Set mode #10, allowing you
access to other groups of Shortwave Broadcast stations.
PRESET MODE
Operation of the VR-120D can be greatly simplified by utilizing the "PRESET" mode.
The PRESET mode provides twelve "starting point" frequencies (one frequency in each of
twelve popular listening bands), from which you may then begin manual tuning.
To operate in the PRESET mode:
1. Press the [BNDs] key for 2 seconds to change the VR-120D
operating mode to PRESET.
2. Press the [BNDs] key to toggle through the following Pre-
Programmed Frequencies.
Basic Operation
Channel Number
3. Once you have chosen a PRESET band segment, you can move off of the Pre-Pro-
grammed Frequency by rotating the DIAL knob. If a particular frequency is of interest
to you for later use, you should store it into a Memory channel, as the Preset frequency
bank resets to its original (default) value if you change banks or exit the Preset mode.
4. Press the [BNDs] key for 2 seconds to disable the PRESET mode and return to
normal operation.
Note: When using the PRESET mode, it isn't possible to utilize the following operations.
• Set Mode 13 ~ Set Mode 25
• Memory Operation
• Search Band Memory
• Memory Scan
• Channel Counter
• Dual Watch
• Priority Monitoring
• Smart Search
To Next Page
Loading...
Need help?
General
