Yaesu VR-120D User Manual

21VR-120D OPERATING MANUAL
Memory Mode
Designated Memory Storage
If you wish to store the frequency into a particular memory channel number, use the "Des-
ignated Memory" storage procedure:
Example: Store 162.450 MHz into Memory Channel 010, and append the label
"NOA450" to the channel data:
1. While operating in the VFO mode, rotate the DIAL knob to select 162.450 MHz.
2. Press and hold the [FUNC] key; while holding it in, then press the [V/M] key. A chan-
nel will appear at the left upper side of the display, and "MW NAM" will appear.
3. Rotate the DIAL knob to select memory # 010.
4. Press the [FUNC] key, then press [SCAN]. You may now release the [FUNC] key.
5. You will observe a space blinking on the LCD; this indicates that you are in the alpha-
numeric label entry mode.
6. Rotate the DIAL knob to select the "N" character.
7. Now press the [FUNC] key; while holding it in, rotate the DIAL one click clockwise to
move on to the next digit. Release the [FUNC] key.
8. Rotate the DIAL knob to select the "O" character.
9. Now press the [FUNC] key; while holding it in, rotate the DIAL one click clockwise to
move on to the next digit. Release the [FUNC] key.
10. Rotate the DIAL knob to select the "A" character.
11. Now press the [FUNC] key; while holding it in, rotate the DIAL one click clockwise to
move on to the next digit. Release the [FUNC] key.
12. Rotate the DIAL knob to select the "4" character.
13. Now press the [FUNC] key; while holding it in, rotate the DIAL one click clockwise to
move on to the next digit. Release the [FUNC] key.
14. Rotate the DIAL knob to select the "5" character.
15. Now press the [FUNC] key; while holding it in, rotate the DIAL one click clockwise to
move on to the next digit. Release the [FUNC] key.
16. Rotate the DIAL knob to select the "0" character.
17. Press the [V/M] key while pressing the [FUNC] key to save the alpha-numeric infor-
mation.
18. Now, press the [V/M] key once more while still holding in the [FUNC] key. This
stores the frequency into the memory. "WRITE" will appear of the display, to confirm
that the frequency data was successfully stored.
You still are operating in the VFO mode, and you may store other channel frequencies into
other memory channel registers in the same manner. To recall these memories, proceed to
the next section.

Yaesu VR-120D Specifications

General

Brand	Yaesu
Model	VR-120D
Category	Receiver
Language	English