Yaesu VR-5000 User Manual

VR-5000 OPERATING MANUAL 25
Masking Memories
You may wish to “Mask” a certain Memory Channel’s data, when you no longer have a
reason to recall that channel.
To Mask a channel’s data:
1. Recall the Memory Channel to be masked.
2. Press the
[
F
]
key momentarily, then press the
[
V/M
(
MW
)]
key.
3. Rotate the DIAL knob to set the cursor to the “Channel” menu, then press the
[
ENT
(
SET
)]
key.
4. Press the
[
F
]
key momentarily, then press the
[
CLR
(
PRI CLR
)]
key.
5. Confirm that the cursor is on the “DELETE”
menu selection, then press the
[
ENT
(
SET
)]
key.
6. Press the
[
CLR
(
PRI CLR
)]
key.
7. Confirm that the cursor is on the “CANCEL”
menu option, then press the
[
ENT
(
SET
)]
key
to mask the channel’s data.
To unmask a channel’s data:
1. Press the
[
F
]
key momentarily, then press the
[
V/M
(
MW
)]
key.
2. Rotate the DIAL knob to set the cursor to “Channel” menu, then press the
[
ENT
(
SET
)]
key.
3. Select the masked memory using the
[

(

)
/
(

)]
keys and DIAL knob. The masked
memory appears with a “I” icon in the lower left corner of the LCD.
4. Press the
[
F
]
key momentarily, then press the
[
CLR
(
PRI CLR
)]
key.
5. Rotate the DIAL knob to set the cursor to the
“OLD READ” menu selection, then press the
[
ENT
(
SET
)]
key.
6. Rotate the DIAL knob to set the cursor to the
“END” menu, then press the
[
ENT
(
SET
)]
key.
7. Confirm that the cursor is on the “WRITE”
menu option, then press the
[
ENT
(
SET
)]
key
to unmask the channel.
Memory Operation

Yaesu VR-5000 Specifications

General

Brand	Yaesu
Model	VR-5000
Category	Receiver
Language	English