VR-5000 OPERATING MANUAL28
MEMORY CHANNEL SORT
The VR-5000 can also sort the memory channels according to “Alpha-Numeric Name
Tag,” “Frequency,” “Receive mode,” or “Channel Number.” When this is done, the
memory channel numbers will be re-arranged to reflect the new lineup of the memorized
channels.
Sorting by Alpha-Numeric Name Tag:
1. Recall the Memory mode.
2. Press the
[
M/S
(
SUB SET
)]
key, then rotate the DIAL knob to set the cursor to the
“TAG NAME” menu.
3. Press the
[
•
(
BEEP
)]
key to set the sorting mode to “A
-
> Z” or “Z
-
> A.”
A
-
> Z: Arranges the memory channels from A to Z (first letter of name).
Z
-
> A: Arranges the memory channels from Z to A (first letter of name).
4. Press the
[
ENT
(
SET
)]
key to initiate the sort.
Sorting for the Receiving Frequency:
1. Recall the Memory mode.
2. Press the
[
M/S
(
SUB SET
)]
key, then rotate the DIAL knob to set the cursor to the
“FREQUENCY” menu.
3. Press the
[
•
(
BEEP
)]
key to select the sorting mode to “A
-
> Z” or “Z
-
> A.”
A
-
> Z: Arranges the memory channels from the lowest frequency to the highest fre-
quency.
Z
-
> A: Arranges the memory channels from the highest frequency to the lowest fre-
quency.
4. Press the
[
ENT
(
SET
)]
key to initiate the sort.
Sorting for the Receiving Mode:
In this configuration, the channels are sorted according to the way the receiving modes
appear on the display; “A
-
> Z” corresponds to “Left to Right” on the display, while “Z
-
> A”
corresponds to “Right to Left” on the display.
1. Recall the Memory mode.
2. Press the
[
M/S
(
SUB SET
)]
key, then rotate the DIAL knob to set the cursor to the “Rx
MODE” menu.
3. Press the
[
•
(
BEEP
)]
key to set the sorting mode to “A
-
> Z” or “Z
-
> A.”
A
-
> Z: Sorts the memory channels as following order:
AUTO « LSB « USB « CW « AM-N « AM « WAM « FM-N « WFM
Z
-
> A: Sorts the memory channels as following order:
WFM « FM-N « WAM « AM « AM-N « CW « USB « LSB « AUTO
4. Press the
[
ENT
(
SET
)]
key to initiate the sort.
Memory Operation