36
Connecting to a node or a room on the Internet
The Portable Digital Node Mode may be not connected to anything other than a Digital Room or a Digital Node. In order to
connect with the analog node station, it is necessary to use the Portable HRI Mode (page 49).
Connection to an Internet Digital Node or a Digital Room may be made in the following two ways:
(1) Connecting to a node or a room by operating the WIRES-X software on the PC
(2) Connecting to a node or a room by operating the transceiver of the portable node
(1) Connecting a node or a room by operating the WIRES-X software on the PC
On the WIRES-X software main screen, you can easily connect to the desired room or node station.
1.
Click the Digital Node or Digital Room to connect.
•
Icon of a digital room or a digital node
: Digital Open room (Only the Digital Nodes
may be connected)
: Digital Node Station
: Portable Digital Node Station
2.
Right-click on the selected Digital Node or Digital Room.
The command list is displayed.
3.
Click the [connect].
When a connection is successfully established, the
IDLE indicator “
” will change to the NET
indicator “ ”, and the User ID of the connected
Node station or Room “ ” is displayed.
“Connected” will appear on the LCD of the portable
node station's transceiver or the transceiver accessing
the portable node station in WIRES-X mode.
z
Room Pop-up Window
When connecting to the room a window will pop up displaying the operational status of the room. For details, refer
to “Room pop-up window” (page 56).
To Next Page
Loading...
Need help?
General
