Yamaha 2B User Manual

EMF00010
Chapter 3
OPERATION
INSTALLATION ........................................3-1
Mounting the outboard motor............3-2
Clamping the outboard motor............3-4
FILLING FUEL AND ENGINE OIL............3-5
Filling fuel..............................................3-5
Gasoline (petrol) and oil mixing .........3-5
PRE-OPERATION CHECK ........................3-7
BREAKING IN (RUNNING IN) ENGINE ..3-8
STARTING ENGINE ...............................3-10
WARMING UP ENGINE.........................3-15
SHIFTING ................................................3-16
STOPPING ENGINE ...............................3-18
TRIMMING OUTBOARD MOTOR.........3-19
Adjusting trim angle..............................3-20
CRUISING IN SHALLOW WATER.........3-22
TILTING UP/DOWN ...............................3-24
CRUISING IN OTHER CONDITIONS.....3-27
Cruising in salt water .........................3-27
Cruising in turbid water.....................3-27
GB
6A1-9-7LA0-3A 3/7/02 12:14 PM Page 48

Yamaha 2B Specifications

General

Engine Type	2-stroke
Fuel Type	Gasoline
Oil Type	2-stroke outboard motor oil
Mixing Ratio	50:1
Ignition System	CDI
Starting System	Manual
Operation Method	Tiller handle
Gear Ratio	2.08:1
Max Power Output	2 HP
Full Throttle RPM Range	4, 500 - 5, 500 RPM
Fuel Tank Capacity	1.2 liters
Weight	9.8 kg
Shaft Length	15 inches