Operation
37
to the fully open position. Make sure that it
turns smoothly and that it completely re-
turns to the fully closed position.
●
Look for loose or damaged connections of
the throttle and shift cables.
Remote control models:
●
Turn the steering wheel full-right and full-
left. Make sure operation is smooth and
unrestricted throughout the whole range
with no binding or excessive free play.
●
Operate the throttle levers several times to
make sure there is no hesitation in their
travel. Operation should be smooth over
the complete range of motion, and each le-
ver should return completely to the idle po-
sition.
●
Look for loose or damaged connections of
the throttle and shift cables.
EMU36481
Engine shut-off cord (lanyard)
Inspect the engine shut-off cord for damage,
such as cuts, breaks, and wear.
EMU27120
Oil
●
Check to be sure you have plenty of oil for
your trip.
EMU27153
Engine
●
Check the engine and engine mounting.
●
Look for loose or damaged fasteners.
●
Check the propeller for damage.
●
Check for engine oil leaks.
EMU27171
Operation after a long period of
storage
When operating the engine after a long peri-
od (12 months) of storage, proceed as fol-
lows:
1. Use a 50:1 gasoline-oil mixture to start
the engine.
2. Start the engine. Leave it idling.
WARNING! Do not touch or remove
electrical parts when starting or dur-
ing operation. Keep hands, hair, and
clothes away from the flywheel and
other rotating parts while the engine
is running.
[EWM00091]
3. Watch for oil flowing through the oil feed
pipes. After any air in the oil lines has
been expelled, the oil injection system
1. Cord
2. Clip
3. Engine shut-off switch
1. Cord
2. Clip
3. Engine shut-off switch
To Next Page
Loading...
Need help?
General
