EasyManuals Logo

Yamaha 50 User Manual

Yamaha 50
90 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #57 background imageLoading...
Page #57 background image
Operation
51
WARNING
EWM00221
Be sure all people are clear of the out-
board motor when tilting up and down.
Body parts can be crushed between the
motor and the clamp bracket when the
motor is trimmed or tilted.
WARNING
EWM00250
Leaking fuel is a fire hazard. If there is a
fuel joint on the outboard motor, discon-
nect the fuel line or close the fuel cock if
the engine will be tilted for more than a
few minutes. Otherwise fuel may leak.
NOTICE
ECM00241
Before tilting the outboard motor, stop
the engine by following the procedure
on page 47. Never tilt the outboard mo-
tor while the engine is running. Severe
damage from overheating can result.
Do not tilt up the engine by pushing the
tiller handle (if equipped) because this
could break the handle.
EMU32723
Procedure for tilting up (power trim
and tilt models)
1. Place the remote control lever / gear
shift lever in neutral.
2. Press the power trim and tilt switch “”
(up) until the outboard motor has tilted
up completely.
UP
ZMU01935
UP
DN
UP
ZMU04993

Table of Contents

Other manuals for Yamaha 50

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yamaha 50 and is the answer not in the manual?

Yamaha 50 Specifications

General IconGeneral
Engine Type4-stroke, SOHC
Cylinders3
Fuel Induction SystemEFI
Prop Shaft Horsepower50hp
Full Throttle RPM Range5000-6000 rpm
Starting SystemElectric
Fuel SystemEFI
Shaft Length20 inches
Alternator Output17A

Related product manuals