Operation
39
the engine by following the procedure
on page 35. Never tilt the outboard mo-
tor while the engine is running. Severe
damage from overheating can result.
●
Do not tilt up the engine by pushing the
tiller handle (if equipped) because this
could break the handle.
EMU32722
Procedure for tilting up (power trim
and tilt models)
1. Place the remote control lever / gear
shift lever in neutral.
2. Press the power trim and tilt switch “”
(up) until the outboard motor has tilted
up completely.
NOTE:
Multifunction tiller handle: The warning indi-
cator may faintly light momentarily while us-
ing the power trim and tilt switch. This occurs
due to the noise from power trim and tilt relay
operation and does not indicate a malfunc-
tion.
3. Pull the tilt support lever toward you to
support the engine.
N
ZMU03196
UP
ZMU04232
To Next Page
Loading...
Need help?
General
