Instruments and indicators
42
EMU41651
Engine warm-up indicator
This indicator appears while the engine is be-
ing warmed up and goes off when warming-
up is finished.
EMU41661
Engine synchronization indicator
In twin types, this display appears while the
engines are under engine synchronization
control. It goes off when engine synchroniza-
tion control is released.
EMU41683
Overheat alert
If the engine temperature rises too high while
cruising, the pop-up window will appear.
Press the “ ” (set) button to change to nor-
mal display, and the overheat-alert indicator
will start to blink. The engine speed will auto-
matically decrease to about 2000–3500
r/min.
Stop the engine immediately if the buzzer
sounds and the overheat alert device has ac-
tivated. Check the cooling water inlet for
clogging.
ECM01594
Do not continue to run the engine if the
overheat-alert indicator blinks. Serious
engine damage will occur.
Do not continue to operate the engine if
an alert device has activated. Consult
your Yamaha dealer if the problem can-
not be located and corrected.
EMU41692
Low oil pressure-alert
If the engine oil pressure drops too low, the
pop-up window will appear. Press the “ ”
(set) button to change to normal display, and
the low oil pressure-alert indicator will start to
blink. The engine speed will automatically de-
crease to about 2000–3500 r/min.
U6DV37E0.book Page 42 Monday, December 10, 2018 4:07 PM
©2020 Yamaha Motor Corporation
To Next Page
Loading...
Need help?
General
Weight and Dimensions
