Name: Yamaha F150
Brand: Yamaha
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Operation

4. Use the tilt support lever to lock the mo-

tor in the up position. Operate the tilt

down switch briefly so the motor is sup-

ported by the tilt support lever.

5. Check that the tilt rod and trim rods are

free of corrosion or other flaws.

6. Activate the tilt-down switch until the

trim rods have retracted completely into

the cylinders.

7. Activate the trim-up switch until the tilt

rod is fully extended. Unlock the tilt sup-

port lever.

8. Tilt the outboard motor down. Check

that the tilt rod and trim rods operate

smoothly.

EMU36585

Battery

Check the battery’s charge. If your boat is

equipped with a Yamaha digital speedome-

ter, the voltmeter and low battery alert func-

tions will help you monitor the battery’s

charge. A battery in good condition will pro-

vide a minimum of 12 volts. Check that the

battery connections are clean, secure and

covered by insulating covers. The electrical

connections of the battery and cables must

be clean and properly connected or the bat-

tery will not start the engine.

1. Tilt rod

2. Trim rod

1. Tilt support lever

ZMU07762

ZMU07763

1. Trim rod

1. Tilt rod

2. Tilt support lever

ZMU07764

ZMU07765

U6DV37E0.book Page 63 Monday, December 10, 2018 4:07 PM

Questions and Answers:

Need help?

Do you have a question about the Yamaha F150 and is the answer not in the manual?

Yamaha F150 Specifications

General