MOX6/MOX8 Owner’s Manual
Quick Guide
57
Saving/Loading Data (File
Mode)
The File mode provides tools for transferring data (such as
Voice, Performance, Song, and Pattern) between the MOX6/
MOX8 and external USB flash memory device connected to
the USB [TO DEVICE] terminal. To enter the File mode, press
the [FILE] button.
This section explains how to save/load all the data on the
user memory of this instrument as an “All” file (extension:
X4A).
Saving the settings to a USB flash
memory device
1 Connect a USB flash memory device to the USB
[TO DEVICE] terminal of this instrument.
2 Press the [FILE] button, and then press the [F2]
SAVE button.
The SAVE display appears in the File mode.
3 Set “TYPE” to “All,” and then select the desired
directory of the device. After that, press the
[ENTER] button.
If storing the root directory, keep the directory set to “root”
without pressing the [ENTER] button. If you want to make a
new directory, press the [SF3] NEW button.
4 Use the Cursor [<]/[v] buttons to move the cursor
to the file name field, assign a name to the file, and
then press the [ENTER] button.
Move to the desired location in the file name field by using
the Cursor [<]/[>] buttons, and then select the desired
characters by using the [DATA] dial or the [INC]/[DEC]
button to enter the selected character. By pressing the [SF6]
button, you can assign the name in the Character List
display. By pressing the [SF2] SET NAME button, the file/
directory name which selected in the file/directory selection
box is copied to the file name field.
5
Press the [SF1] EXEC button to save the file.
Loading the settings from a USB
flash memory device
1 Connect a USB flash memory device to the USB
[TO DEVICE] terminal of this instrument.
2 Press the [FILE] button, and then press the [F3]
LOAD button.
The LOAD display appears in the File mode.
3 Set “TYPE” to “All,” and then select the file
(extension: X4A) of the memory.
Select the directory which has desired file in the file/directory
selection box, and then press the [ENTER] button. After that,
select the desired file.
Set the desired file
type for saving
The current determined directory
as the save destination of the USB
flash memory device
File/Directory Selection box
Select the desired directory of the USB
flash memory device, and then press
the [ENTER] button.
To Next Page
Loading...
Need help?
General
