Yamaha MT-10 2020 User Manual

5-1
1
2
3
4
5
6
7
8
9
10
11
12
Instrument and control functions
EAU10462
Main switch/steering lock
The main switch/steering lock controls
the ignition and lighting systems, and is
used to lock the steering. The various
positions are described below.
EAU74690
ON
All electrical circuits are supplied with
power. The meter lighting, taillight, li-
cense plate light, auxiliary light and po-
sition lights come on, and the engine
can be started. The key cannot be re-
moved.
TIP
The headlights come on automatically
when the engine is started and stay on
until the key is turned to “OFF”, even if
the engine stalls.
EAU10662
OFF
All electrical systems are off. The key
can be removed.
WARNING
EWA10062
Never turn the key to “OFF” or
“LOCK” while the vehicle is moving.
Otherwise the electrical systems will
be switched off, which may result in
loss of control or an accident.
EAU1068B
LOCK
The steering is locked and all electrical
systems are off. The key can be re-
moved.
To lock the steering
1. Turn the handlebars all the way to
the left.
2. With the key in the “OFF” position,
push the key in and turn it to
“LOCK”.
3. Remove the key.
TIP
If the steering will not lock, try turning
the handlebars back to the right slightly.
1. Push.
2. Turn.
12
B67-9-13.book 1 ページ ２０１９年７月１９日 金曜日 午後２時５６分

Yamaha MT-10 2020 Specifications

General

Bore x Stroke	79.0 mm x 50.9 mm
Compression Ratio	12.0:1
Fuel System	Fuel Injection
Transmission	6-speed
Front Suspension	43mm inverted fork, fully adjustable
Front Brakes	Dual 320mm hydraulic disc, ABS
Rear Brakes	220mm hydraulic disc, ABS
Front Tire	120/70ZR17
Rear Tire	190/55ZR17
Seat Height	825 mm
Starter System	Electric
Final Drive	Chain
Width	800 mm
Engine Type	Liquid-cooled, 4-stroke, DOHC, 4-valve
Fuel Capacity	17 liters
Horsepower	160 HP
Maximum Power	160 HP @ 11500 rpm
Maximum Torque	111 Nm @ 9000 rpm
Length	2, 095 mm
Height	1110 mm
Wheelbase	1, 405 mm
Torque	111 Nm

Summary

Safety information

Safe Riding

Guidelines for safe riding, pre-operation checks, and hazard awareness.

Special features

Traction control system

Function and operation of the traction control system for enhanced grip.

Instrument and control functions

Multi-function meter unit

Details on the speedometer, tachometer, fuel meter, and other displays.

For your safety – pre-operation checks

Fuel

Checks for fuel level, lines, and tank condition before operation.

Coolant

Checking the coolant level in the reservoir and cooling system.

Front brake

Checks for front brake operation, fluid level, pads, and hydraulic system.

Rear brake

Checks for rear brake operation, fluid level, pads, and hydraulic system.

Clutch

Checking clutch operation, cable, and lever free play.

Throttle grip

Ensuring smooth throttle operation and checking free play.

Wheels and tires

Inspection of tires for damage, tread depth, and air pressure.

Sidestand

Operation and important riding points

Starting the engine

Procedures and conditions required for starting the engine.

Shifting

Periodic maintenance and adjustment

General maintenance and lubrication chart

Checking the spark plugs

Engine oil

Checking engine oil level and procedures for oil and filter changes.

Coolant

Air filter element

Tires

Tire inspection, air pressure checks, and replacement guidelines.

Adjusting the clutch lever free play

Checking the brake fluid level

Procedure for checking and replenishing the brake fluid level.

Drive chain slack

Checking the front fork

Battery

Replacing the fuses

Troubleshooting charts

Guides for diagnosing starting problems and poor engine performance.

Engine overheating

Motorcycle care and storage

Consumer information

YAMAHA MOTOR CORPORATION, U.S.A. 2020 AND LATER MODEL STREET & DUAL-PURPOSE MOTORCYCLE LIMITED WARRANTY

THE PERIOD OF WARRANTY