EasyManuals Logo

Yamaha MT-10 2020 User Manual

Yamaha MT-10 2020
120 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #61 background imageLoading...
Page #61 background image
8-1
1
2
3
4
5
6
7
8
9
10
11
12
Periodic maintenance and adjustment
EAU17246
Periodic inspection, adjustment, and lu-
brication will keep your vehicle in the
safest and most efficient condition pos-
sible. Safety is an obligation of the vehi-
cle owner/operator. The most important
points of vehicle inspection, adjust-
ment, and lubrication are explained on
the following pages.
The intervals given in the periodic
maintenance charts should be simply
considered as a general guide under
normal riding conditions. However, de-
pending on the weather, terrain, geo-
graphical location, and individual use,
the maintenance intervals may need to
be shortened.
WARNING
EWA10322
Failure to properly maintain the ve-
hicle or performing maintenance ac-
tivities incorrectly may increase
your risk of injury or death during
service or while using the vehicle. If
you are not familiar with vehicle ser-
vice, have a Yamaha dealer perform
service.
WARNING
EWA15123
Turn off the engine when performing
maintenance unless otherwise
specified.
A running engine has moving
parts that can catch on body
parts or clothing and electrical
parts that can cause shocks or
fires.
Running the engine while ser-
vicing can lead to eye injury,
burns, fire, or carbon monoxide
poisoning – possibly leading to
death. See page 2-2 for more in-
formation about carbon monox-
ide.
WARNING
EWA15461
Brake discs, calipers, drums, and
linings can become very hot during
use. To avoid possible burns, let
brake components cool before
touching them.
EAU17303
Emission controls not only function to
ensure cleaner air, but are also vital to
proper engine operation and maximum
performance. In the following periodic
maintenance charts, the services relat-
ed to emissions control are grouped
separately. These services require
specialized data, knowledge, and
equipment. Maintenance, replacement,
or repair of the emission control devic-
es and systems may be performed by
any repair establishment or individual
that is certified (if applicable). Yamaha
dealers are trained and equipped to
perform these particular services.
B67-9-13.book 1 ペー 2019年7月19日 金曜日 午後2時56

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yamaha MT-10 2020 and is the answer not in the manual?

Yamaha MT-10 2020 Specifications

General IconGeneral
Bore x Stroke79.0 mm x 50.9 mm
Compression Ratio12.0:1
Fuel SystemFuel Injection
Transmission6-speed
Front Suspension43mm inverted fork, fully adjustable
Front BrakesDual 320mm hydraulic disc, ABS
Rear Brakes220mm hydraulic disc, ABS
Front Tire120/70ZR17
Rear Tire190/55ZR17
Seat Height825 mm
Starter SystemElectric
Final DriveChain
Width800 mm
Engine TypeLiquid-cooled, 4-stroke, DOHC, 4-valve
Fuel Capacity17 liters
Horsepower160 HP
Maximum Power160 HP @ 11500 rpm
Maximum Torque111 Nm @ 9000 rpm
Length2, 095 mm
Height1110 mm
Wheelbase1, 405 mm
Torque111 Nm

Related product manuals