EasyManuals Logo

Yamaha MT-10 SP User Manual

Yamaha MT-10 SP
134 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #113 background imageLoading...
Page #113 background image
9-1
1
2
3
4
5
6
7
8
9
10
11
12
13
Motorcycle care and storage
EAU37834
Matte color caution
NOTICE
ECA15193
Some models are equipped with
matte colored finished parts. Be
sure to consult a Yamaha dealer for
advice on what products to use be-
fore cleaning the vehicle. Using a
brush, harsh chemical products or
cleaning compounds when cleaning
these parts will scratch or damage
their surface. Wax also should not
be applied to any matte colored fin-
ished parts.
EAU83912
Care
Frequent, thorough cleaning of the ve-
hicle will not only enhance its appear-
ance but also will improve its general
performance and extend the useful life
of many components. Washing, clean-
ing, and polishing will also give you a
chance to inspect the condition of the
vehicle more frequently. Be sure to
wash the vehicle after riding in the rain
or near the sea, because salt is corro-
sive to metals.
TIP
The roads of heavy snowfall areas
may be sprayed with salt as a
de-icing method. This salt can stay
on the roads well into spring, so be
sure to wash the underside and
chassis parts after riding in such
areas.
Genuine Yamaha care and main-
tenance products are sold under
the YAMALUBE brand.
See your Yamaha dealer for addi-
tional cleaning tips.
NOTICE
ECA26280
Improper cleaning can cause cos-
metic and mechanical damage. Do
not use:
high-pressure washers or
steam-jet cleaners. Excessive
water pressure may cause water
seepage and deterioration of
wheel bearings, brakes, trans-
mission seals and electrical de-
vices. Avoid high-pressure
detergent applications such as
those available in coin-operated
car washers.
harsh chemicals, including
strong acidic wheel cleaners,
especially on spoke or magne-
sium wheels.
harsh chemicals, abrasive
cleaning compounds, or wax on
matte-finished parts. Brushes
can scratch and damage the
matte-finish, use soft sponge or
towel only.
towels, sponges, or brushes
contaminated with abrasive
cleaning products or strong
chemicals such as, solvents,
BGG-9-10-E0.book 1 ペー 022年1月26日 水曜日 午前11時37分

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yamaha MT-10 SP and is the answer not in the manual?

Yamaha MT-10 SP Specifications

General IconGeneral
Engine TypeLiquid-cooled, 4-stroke, DOHC, 4-valve
Bore x Stroke79.0 mm x 50.9 mm
Compression Ratio12.0:1
Fuel SystemFuel injection
Transmission6-speed
Final DriveChain
Front Tire120/70ZR17M/C (58W)
Rear Tire190/55ZR17M/C (75W)
Wheelbase1, 405 mm
Seat Height835 mm
Length2, 095 mm
Width800 mm
Minimum Ground Clearance135 mm
Maximum Torque111.0 Nm (11.3 kg-m) @ 9, 000 rpm
Front BrakesDual 320 mm hydraulic disc, ABS
Rear Brakes220 mm hydraulic disc, ABS
Fuel Capacity17 liters

Related product manuals