En 46
(RX-V681)
The following screen appears on the TV.
This completes the preparations.
See “Measuring at one listening position (single measure)” (p.47)
to start the measurement.
(RX-V781)
The following screen appears on the TV.
Proceed to Step 5.
X
• To cancel the operation, disconnect the YPAO microphone before starting the
measurement.
• To configure the power amplifier assignment setting, press RETURN and
select “Manual Setup” (p.111).
5
(RX-V781 only) If desired, change the measuring method
(multi/single).
1
Use the Cursor keys to select “Multi Position” and press ENTER.
2
Use the Cursor keys to select a setting and then press ENTER.
Settings
X
• If you perform the multi measure, the speaker settings will be optimized for you to
enjoy surround sound in a wider space.
• If you perform the multi measure, first place the YPAO microphone at the listening
position you will be seated most frequently.
Yes
Select this option if you will have several listening
positions or if you want others to enjoy surround
sound. You can take measurements at up to 8 different
positions in the room. The speaker settings will be
optimized to suit the area defined by those positions
(multi measure).
No (default)
Select this option if your listening position will always
be fixed. Take the measurements at only one position.
The speaker settings will be optimized to suit that
position (single measure).
To Next Page
Loading...
Need help?
General