En 63
Selecting the input source and favorite settings with one touch (SCENE)
The SCENE function allows you to select the assigned input source,
sound program, Compressed Music Enhancer on/off, and HDMI output
jack (RX-V781 only) with just one touch.
1
Press SCENE.
The input source and settings registered to the corresponding
scene are selected. The unit turns on automatically when it is in
standby mode.
By default, the following settings are registered for each scene.
Registering a scene
1
Perform the following operations to prepare the settings
you want to assign to a scene.
•Select an input source (p.62)
• Select a sound program (p.64) or straight decode mode (p.68)
• Enable/disable Compressed Music Enhancer (p.69)
• (RX-V781 only)
Selecting an HDMI output jack (p.62)
2
Hold down the desired SCENE key until “SET Complete”
appears on the front display.
X
• You can also configure scene assignments in the “Scene” menu (p.103).
• The SCENE link playback function allows you to start playback of an external device
connected to the unit via HDMI. To enable SCENE link playback, specify the device
type in “Device Control” (p.104) in the “Scene” menu.
SCENE
Input HDMI 1 AV 4 NET RADIO TUNER
Sound program MOVIE (Sci-Fi) STRAIGHT
MUSIC
(7ch Stereo)
MUSIC
(7ch Stereo)
Compressed
Music Enhancer
OffOnOnOn
HDMI output
jack
(RX-V781 only)
HDMI OUT
1+2
HDMI OUT
1+2
HDMI OUT
1+2
HDMI OUT
1+2
To Next Page
Need help?
General