Name: Yamaha Virago XV535
Brand: Yamaha
Rating: 5 (1 reviews)

To Next Page

To Previous Page

PERIODIC MAINTENANCE AND MINOR REPAIR

6-34

To service the rear wheel

Raise the rear wheel off the ground by

using a motorcycle stand or, if a motor-

cycle stand is not available, by placing

a jack either under each side of the

frame in front of the rear wheel or under

each side of the swingarm.

EAU03239

Front wheel

To remove the front wheel

EW000122

WARNING

●

It is advisable to have a Yamaha

dealer service the wheel.

●

Securely support the motor-

cycle so that there is no danger

of it falling over.

1. Disconnect the speedometer ca-

ble from the front wheel.

2. Loosen the front wheel axle pinch

bolt, then the wheel axle.

3. Lift the front wheel off the ground

according to the procedure on

page 6-33.

4. Pull the wheel axle out, and then

remove the wheel.

ECA00048

CAUTION:

Do not apply the brake after the

wheel has been removed together

with the brake disc, otherwise the

brake pads will be forced shut.

1. Speedometer cable 1. Front wheel axle pinch bolt

2. Wheel axle

E_3bt.book Page 34 Thursday, September 7, 2000 10:01 AM

Questions and Answers:

Need help?

Do you have a question about the Yamaha Virago XV535 and is the answer not in the manual?

Yamaha Virago XV535 Specifications

General