Yealink CPE80 User Manual

User Guide for the VC120 Video Conferencing System
110
To start/stop presentation manually during a call:
Do one of the following:
- Press (Presentation soft key) on the remote control to start or stop a presentation.
- Press on the VCP40 phone to start or stop a presentation.
Configuring Camera Presets
You can store the preset to a numeric key via the remote control or web user interface. Each
camera preset stores the camera pan, tilt, and zoom settings. This means that you can point a
camera at pre-defined locations by pressing stored keys.
You can store up to 10 preset camera positions using the remote control. If you want to store
more than 10 preset camera positions, you can enable the multiple preset feature. For more
information, refer to Yealink VC400 & VC120 Video Conferencing System Administrator Guide .
Storing a Local Camera Preset
To store a local camera preset when the system is idle:
1. Press (Preset soft key).
2. Press the navigation key to adjust the angle of the camera or press or to adjust the
focus of the camera.
3. Long press any number key (0-9) on the remote control until the screen prompts ”Preset
Key ‘X’ successfully saved” (“X” stands for the saved key).
Current camera position and focus are stored to the numeric key.
4. Press (Exit soft key) to return to the idle screen.

Yealink CPE80 Specifications

General

Brand	Yealink
Model	CPE80
Category	Conference System
Language	English