Getting Started
23
Getting Started
This chapter provides the following basic installation instructions and information for achieving
the best performance from your VC120 video conferencing system. Topics include:
System Installation
Powering the System On or Off
Setup Wizard
Registration
Idle Screen Display
Navigating Menus on the Display Device
Keyboard Input Method
Entering Data and Editing Fields
System Status
If you require additional information, or assistance to help you use your new phone, contact
your system administrator.
System Installation
This section introduces the following:
Installing the VC120 video conferencing system
Installing the camera
Installing batteries for the remote control
Note
Up to two display devices can be connected to the VC120 codec. Because the display device is
not included in the package, you need to purchase it separately if required. Ensure that the
purchased display device supports HDMI input.
When connecting only one display device to the VC120 codec, Display1 port is the only available
port. If dual screen mode is required, you can connect another display device to the Display2
port.
Because DVI cable is tailor-made, please use the Yealink-supplied DVI cable.
To prevent shock, do not connect the power adapter and turn on the power before connecting
all system components.
To Next Page
Need help?
General
