EasyManuals Logo
Home>Yealink>IP Phone>SIP-T32G

Yealink SIP-T32G User Manual

Yealink SIP-T32G
118 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #109 background imageLoading...
Page #109 background image
Troubleshooting
99
This chapter provides general troubleshooting information to help you solve the
problems you might encounter when using your SIP-T32G IP phone.
If you require additional information or assistance with your new phone, contact your
system administrator.
Why is the phone LCD screen blank?
Ensure your phone is properly plugged into a functional AC outlet.
Ensure that the phone isn’t plugged into a plug controlled by a switch that is off.
If the phone is plugged into a power strip, try plugging it directly into a wall outlet
instead.
If your phone is powered from PoE, ensure you use a PoE compliant switch or hub, or
contact your system administrator for more information.
Check that the power LED is on to ensure the phone is powered on.
Why does the phone display "Network Unavailable"?
Ensure that the Ethernet cable is plugged into the Internet port o the phone and the
Ethernet cable is not loose.
Ensure that the switch or hub in your network is operational.
Contact your system administrator for more information.
Why does the phone display "No Service"?
The phone LCD screen prompts "No Service" message when the SIP accounts do not
register successfully. Contact your system administrator for more information on account
settings.
Why cant I get a dial tone?
Check for any loose connections and that the phone has been installed properly. For the
installation instructions, refer to Phone Installation on page 11.
Check whether dial tone is present on one of the audio modes.
Switch between the Handset, Headset (if present) or Hands-Free Speakerphone to
check whether dial tone is present for one of the audio modes.
If the dial tone exists on another audio mode, connect a different handset or
headset to isolate the problem.

Other manuals for Yealink SIP-T32G

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T32G and is the answer not in the manual?

Yealink SIP-T32G Specifications

General IconGeneral
Keypad number of keys32
SpeakerphoneYes
Voice codecsG.711, G.722, G.723.1, G.726
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorBlack
Touchscreen-
Display resolution400 x 240 pixels
Display number of colors262144 colors
Lines quantity- lines
Phonebook capacity1000 entries
Number of VoIP accounts3
BluetoothNo
Security algorithms802.1x RADIUS, HTTPS, SSL/TLS
Ethernet LAN (RJ-45) ports2
AC adapter input voltage100 - 240 V
AC adapter output voltage5 V
Power consumption (typical)4 W
Operating relative humidity (H-H)10 - 95 %
Compliance industry standardsIEEE 802.3af
Number of handles included1 pc(s)
Weight and Dimensions IconWeight and Dimensions
Depth200 mm
Width185 mm
Height90 mm
Weight770 g

Related product manuals