Yealink SIP-T32G User Manual

Advanced Phone Features
81
This chapter provides operating instructions for the advanced features of the SIP-T32G IP
phone. The topics include:
 Busy Lamp Field (BLF)
 BLF List
 Shared Line
 Call Recording
 Hot Desking
 Intercom
 Automatic Call Distribution (ACD)
 Messages
If you require additional information or assistance with your new phone, contact your
system administrator.
You can use the BLF feature to monitor a specific user for status changes on the phone.
For example, you can configure a BLF key on the phone for monitoring the status of a
friend’s phone (busy or idle). When the friend picks up his phone to make a call, the BLF
key (memory key) LED illuminates solid red on your phone to indicate that the friend’s
phone is in use and busy. For more BLF key LED indications, refer to LED Instructions on
page 5.
You can press a BLF key to dial out the monitored phone number when it is idle. You can
receive a visual alert and an audio alert when the monitored phone is ringing. You can
also pick up a call directly by pressing the BLF key when the monitored phone is ringing.
For more information, contact your system administrator.
To configure a BLF key via phone user interface:
1. Press Menu->Features->DSS Keys.
2. Select the desired DSS key.
3. Press or , or the Switch soft key to select BLF from the Type field.
4. (Optional.) Enter the BLF label in the Label field.
5. Press or , or the Switch soft key to select the desired line from the Account
ID field.
6. Enter the phone number or extension you want to monitor in the Value field.

Yealink SIP-T32G Specifications

General

Keypad number of keys	32
Speakerphone	Yes
Voice codecs	G.711, G.722, G.723.1, G.726
Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Touchscreen	-
Display resolution	400 x 240 pixels
Display number of colors	262144 colors
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	3
Bluetooth	No
Security algorithms	802.1x RADIUS, HTTPS, SSL/TLS
Ethernet LAN (RJ-45) ports	2
AC adapter input voltage	100 - 240 V
AC adapter output voltage	5 V
Power consumption (typical)	4 W
Operating relative humidity (H-H)	10 - 95 %
Compliance industry standards	IEEE 802.3af
Number of handles included	1 pc(s)

Weight and Dimensions

Depth	200 mm
Width	185 mm
Height	90 mm
Weight	770 g