Yealink SIP-T32G User Manual

User Guide SIP-T32G IP Phone
28
devices (handset, speakerphone or headset), when the phone is in the dialing interface
or during a call. You can also press the Volume key to adjust the ringer volume when the
phone is idle.
1. Press to adjust the ringer volume when the phone is in the idle
screen.
2. When the phone is during a call, press to adjust the volume of audio
device (handset, speakerphone or headset).
Note
Ring tones are used to indicate incoming calls. You can select different ring tones to
distinguish the accounts or to distinguish your phone from your neighbor’s.
To select a ring tone for the phone via phone user interface:
1. Press Menu->Setting->Basic Settings->Ring Tones.
2. Press or to select the desired ring tone.
3. Press the Save soft key to accept the change or the Back soft key to cancel.
If ringer volume is adjusted to minimum, the icon will appear on the LCD screen.

Yealink SIP-T32G Specifications

General

Keypad number of keys	32
Speakerphone	Yes
Voice codecs	G.711, G.722, G.723.1, G.726
Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Touchscreen	-
Display resolution	400 x 240 pixels
Display number of colors	262144 colors
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	3
Bluetooth	No
Security algorithms	802.1x RADIUS, HTTPS, SSL/TLS
Ethernet LAN (RJ-45) ports	2
AC adapter input voltage	100 - 240 V
AC adapter output voltage	5 V
Power consumption (typical)	4 W
Operating relative humidity (H-H)	10 - 95 %
Compliance industry standards	IEEE 802.3af
Number of handles included	1 pc(s)

Weight and Dimensions

Depth	200 mm
Width	185 mm
Height	90 mm
Weight	770 g