Yealink SIP-T32G User Manual

Basic Call Features
75
The system establishes call between phone C and B.
Note
You can use call pickup feature to answer someone else’s incoming call on the phone.
The SIP-T32G IP phone supports the direct call pickup and group call pickup features.
Direct call pickup is used for picking up a call that is ringing at a specific phone number.
Group call pickup is used for picking up a call that is ringing at any phone number in the
group. The pickup group should be predefined, contact your system administrator for
more information.
You can configure the phone to pick up an incoming call by using the DPickup/GPickup
soft key. You can also configure the call pickup code on a global or per-line basis via
web user interface.
Note
Direct Call Pickup
To enable the direct call pickup via web user interface:
1. Click on Phone->Features.
2. Click the “+” sign on the left of the Call Pickup to expand the feature list.
3. Select Enabled from the pull-down list of Direct Call Pickup.
The call park feature code and call park retrieve feature code are predefined on the
system server. Contact your system administrator for more information.
If the parked call is not retrieved within a period of time assigned by the system, the
phone performing call park feature will receive call back.
If there are many incoming calls at the same time, pressing the Gpickup soft key on the
phone will pick up the call that rings first.

Yealink SIP-T32G Specifications

General

Keypad number of keys	32
Speakerphone	Yes
Voice codecs	G.711, G.722, G.723.1, G.726
Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Touchscreen	-
Display resolution	400 x 240 pixels
Display number of colors	262144 colors
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	3
Bluetooth	No
Security algorithms	802.1x RADIUS, HTTPS, SSL/TLS
Ethernet LAN (RJ-45) ports	2
AC adapter input voltage	100 - 240 V
AC adapter output voltage	5 V
Power consumption (typical)	4 W
Operating relative humidity (H-H)	10 - 95 %
Compliance industry standards	IEEE 802.3af
Number of handles included	1 pc(s)

Weight and Dimensions

Depth	200 mm
Width	185 mm
Height	90 mm
Weight	770 g