User Guide for the SIP-T41P IP Phone
96
enable the phone to automatically answer an incoming intercom call while there is
already an active call on the phone, the active call is placed on hold.
Intercom features you need to know:
Intercom features Description
Accept Intercom
Allows you to enable or disable the IP phone to
automatically answer an incoming intercom call.
Intercom Mute
Allows you to enable or disable the microphone on
the IP phone for Intercom calls.
Warning Tone
Allows you to enable or disable the IP phone to play
a warning tone when the IP phone receives an
incoming intercom call.
Intercom Barge
Allows you to enable or disable the IP phone to
automatically answer an incoming intercom call
while there is already an active call on the phone.
To configure intercom features via phone user interface:
1. Press Menu->Features->Intercom.
2. Make the desired changes.
3. Press the Save soft key to accept the change or the Back soft key to cancel.
You can also configure these specific parameters via web user interface at the path
Features->Intercom.
Accept Intercom
You can enable or disable the phone to automatically answer an incoming intercom
call. If Accept Intercom is enabled, the phone automatically answers an incoming
intercom call. If Accept Intercom is disabled, the phone rejects incoming intercom calls
and sends a busy signal to the caller. Accept Intercom is enabled by default.
Note
Intercom Mute
You can mute or un-mute the microphone on the phone for intercom calls
automatically. If Intercom Mute is enabled, the microphone is muted for intercom calls.
If Intercom Mute is disabled, the microphone is un-muted for incoming calls. Intercom
Mute is disabled by default.
Your administrator can set a time period delay before the phone automatically answers.
Contact your system administrator for more information.
To Next Page
Loading...
Need help?
General
