User Guide for the SIP-T41P IP Phone
70
Do Not Disturb (DND)
You can use the DND feature to reject incoming calls automatically on the phone and
the callers can hear a busy signal or a message depending on your server.
You can enable/disable the DND feature for the phone system, or you can customize
the DND feature for each account or all accounts. The following describes the DND
modes:
z Phone (default): DND in phone mode means that the DND feature is effective for
the phone system.
z Custom: DND in custom mode means that you can configure the DND feature for
each account or all accounts.
You can also configure the phone to receive incoming calls from some authorized
numbers when the DND feature is enabled.
To configure the DND mode via web user interface:
1. Click on Features->Forward & DND.
2. In the DND block, mark the desired radio box in the Mode field.
3. Click Confirm to accept the change.
Note
To activate DND in phone mode:
1. Press the DND soft key when the phone is idle.
You can configure the DND mode via web user interface only.
To Next Page
Loading...
Need help?
General
