User Guide for the SIP-T41P IP Phone
40
Headset Mode Activation/Deactivation
To activate the headset mode:
1. Press on the phone.
The headset key LED illuminates solid green when the headset mode is activated.
Press the line key or the Answer soft key to answer an incoming call, the call will be
connected to your headset automatically.
Enter the desired number and then press the Send soft key, the phone will place a
call using the headset automatically. For more information about using the headset
to place a call, refer to Placing Calls on page 61.
To deactivate the headset mode:
1. Press again on the phone.
The headset key LED turns off when the headset mode is deactivated.
Headset Prior
You can use headset in priority when enabling the headset prior feature. This feature is
especially useful for permanent or full-time headset users.
To enable the headset prior feature via web user interface:
1. Click on Features->General Information.
2. Select Enabled from the pull-down list of Headset Prior.
3. Click Confirm to accept the change.
To Next Page
Loading...
Need help?
General
