Basic Call Features
83
Call Pickup
You can use call pickup feature to answer someone else’s incoming call on the phone.
The SIP-T41P IP phone supports the directed call pickup and group call pickup features.
Directed call pickup is used for picking up a call that is ringing at a specific phone
number. Group call pickup is used for picking up a call that is ringing at any phone
number in the group. The pickup group should be predefined, contact your system
administrator for more information.
You can pick up an incoming call by using the DPickup/GPickup soft key. To use the
call pickup feature, you need to configure the call pickup code beforehand on a
global or per-line basis via web user interface.
Note
Directed Call Pickup
To enable directed call pickup and configure the directed call pickup code on a
global basis via web user interface:
1. Click on Features->Call Pickup.
2. Select Enabled from the pull-down list of Directed Call Pickup.
3. Enter the directed call pickup code in the Directed Call Pickup Code field.
4. Click Confirm to accept the change.
To configure the directed call pickup code on a per-line basis via web user interface:
1. Click on Account.
2. Select the desired account from the pull-down list of Account.
3. Click on Advanced.
If there are many incoming calls at the same time, pressing the GPickup soft key on the
phone will pick up the call that rings first.
To Next Page
Loading...
Need help?
General
