Customizing Your Phone
41
To use the headset prior feature, you should activate the headset mode in advance:
1. Physically connect the headset.
2. Press to activate the headset mode.
Note
Dual Headset
You can use two headsets when enabling the dual headset feature. To use this feature,
you must physically connect headsets to the headset jack and handset jack
respectively. Once the phone joins in a call, people with the headset connected to the
headset jack has a full-duplex conversation, another people with the headset
connected to the handset jack is only allowed to listen to.
To enable the dual headset feature via web user interface:
1. Click on Features->General Information.
2. Select Enabled from the pull-down list of Dual Headset.
3. Click Confirm to accept the change.
Note
If the headset prior feature is enabled, the headset mode will not be deactivated until
you press the Headset key again.
You can configure headset prior via web user interface only.
You can configure dual headset via web user interface only.
To Next Page
Loading...
Need help?
General
