User Guide for the SIP-T41P IP Phone
104
2. Follow the voice prompt to listen to voice mails.
Note
To view the voice mail via phone user interface:
1. Press Menu->Messages->Voice Mail->View Voice Mail.
The phone LCD screen displays the amount of the voice mails that includes new or
old voice mails.
2. Select an account and then press the Connect soft key to listen to the voice mails.
Message Waiting Indicator (MWI)
The SIP-T41P IP phone supports MWI feature when receiving a new voice message. If
someone leaves you a voice mail, you will receive a message waiting indicator. MWI
will be indicated in three ways: a warning tone, the power indicator LED slow flashes red
and an indicator message (including a voice mail icon) appears on the LCD screen.
This is cleared only when you retrieve all voice mails or delete them.
For some particular servers, the MWI service is unsolicited. So the SIP-T41P IP phone just
needs to handle the MWI messages sent from the server. But for some servers, the MWI
service is solicited. In this case, the SIP-T41P IP phone must enable the MWI Subscription
for MWI messages.
Note
The MWI subscription parameters you need to know:
Options Description
Subscribe for MWI
Enable or disable a subscription for MWI service.
MWI Subscription Period
Period of MWI subscription. The IP phone re-sends a
SUBSCRIBE request before initial SUBSCRIBE
expiration.
Subscribe MWI to Voice
Mail
Enable or disable a subscription to the voice mail
number for MWI service.
MWI service is not available on all servers. Contact your system administrator for more
information
.
Before listening to the voice mails, make sure the voice mail access code has been
configured.
When all new voice mails are retrieved, the power indicator LED will stop flashing.
To Next Page
Loading...
Need help?
General
