Advanced Phone Features
103
Messages
Voice Mail
You can leave voice mails for someone else on the SIP-T41P IP phone. You can also
listen to the voice mails stored in a centralized location. When receiving a new voice
mail, the phone will play a warning tone, and the power indicator LED will slow flash red.
The phone LCD screen will display a prompt message and appear an icon.
Note
To leave a voice mail:
You can leave a voice mail for someone else when he/she is busy or inconvenient to
answer the call. Follow the voice prompt from the system server to leave the voice mail,
and then hang up after completing the voice mail.
To configure voice mail access codes via phone user interface:
1. Press Menu->Messages->Voice Mail->Set Voice Mail.
2. Press the navigation keys to highlight the account which you want to set.
3. Press the 123 soft key to select the proper input mode and then enter the voice
mail access code (e.g., *97).
4. Press the Save soft key to accept the change or the Back soft key to cancel.
Note
To listen to the voice mails:
1. When the phone user interface prompts receiving new voice mails and the power
indicator LED slow flashes red, press or the Connect soft key to dial out the
voice mail access code.
Voice mail feature is not available on all servers, contact your system administrator for
more information.
Voice mail access code must be predefined on the system server. Contact your system
administrator for the more information.
To Next Page
Loading...
Need help?
General
