Customizing Your Phone
53
Replace Rule
You can configure one or more replace rules to remove the specified string and
replace it with another string. You can configure a pattern with wildcards (expression
syntax refer to the table above), so that any string that matches the pattern will be
replaced. This feature is convenient for you to dial out a long number. For example, a
replace rule is configured as "Prefix: 1" and "Replace: 1234567", when you try to dial out
the number “1234567”, you just need to enter “1” on the phone and then press the
Send soft key.
To add a replace rule via web user interface:
1. Click on Settings->Dial Plan->Replace Rule.
2. Enter the string (e.g., 2xx) in the Prefix field.
3. Enter the string (e.g., 12345) in the Replace field.
4. Enter the desired line ID in the Account field or leave it blank.
5. Click Add to add the replace rule.
When you enter the number “234” using the keypad and then dial out, the phone
will dial out “12345” instead.
Note
To edit a replace rule via web user interface:
1. Click on Settings->Dial Plan->Replace Rule.
2. Select the desired replace rule by checking the checkbox.
The valid values of Account field can be one or more digits among 1, 2, and 3. Each digit
must be separated by a “,”. For example: when you enter the value “1, 2” in the Account
field, this replace rule will apply to account1 and account2.
If you leave the Account field blank, the replace rule will apply to all accounts.
To Next Page
Loading...
Need help?
General
