Yealink T5 Series User Manual

User Guide for T5 Series IP Phones
112
- If you are using the speakerphone, press the Cancel key, Speakerphone key or End Call.
Note
Auto Redial
When a called party is busy, the phone can be enabled to automatically redial his phone number
until the call is answered. You can configure the max attempts of auto redial (Redial Times) and
the interval between every two redial attempts (Redial Interval).
Enabling the Auto Redial
Procedure:
1. Navigate to Menu->Features->Others->Auto Redial.
2. Select Enabled from the Auto Redial field.
3. Enter the desired time between 1 and 300 (seconds) in the Redial Interval field.
4. Enter the desired number between 1 and 300 in the Redial Times field.
5. Press Save.
Auto redial is configurable via web user interface at the path Features->General Information.
To end a call placed on hold, you can press the End Call soft key to end the call directly, or press
the Resume soft key to resume the call before ending it.

Yealink T5 Series Specifications

General

Brand	Yealink
Model	T5 Series
Category	IP Phone
Language	English