User Guide for T5 Series IP Phones
48
The time and date is displayed on the status bar.
Time & Date
You can configure the phone to obtain the time and date from the SNTP server automatically, or
configure the time and date manually.
Configuring the SNTP Setting
Procedure:
1. Navigate to Menu->Basic->Time & Date->General->SNTP Settings.
2. Select the time zone that applies to your area from the Time Zone field.
3. Enter the domain name or IP address of SNTP server in the NTP Server1 and NTP Server2
field respectively.
4. Select the desired value from the Daylight Saving field.
5. Select the desired time zone name from the Location field.
This field appears only if Daylight Saving field is selected to Automatic.
6. Press Save.
SNTP Setting is configurable via web user interface at the path Settings->Time & Date.
Note
Please refer to Appendix A – Time Zones for the list of available time zones on the IP phone.
If the phone cannot obtain the time and date from the Simple Network Time Protocol (SNTP)
server, contact your system administrator for more information.
To Next Page
Loading...
Need help?
General
