Yealink T5 Series User Manual

User Guide for T5 Series IP Phones
70
Adding a Contact to the Local Directory
Procedure:
1. Navigate to Menu->Directory->Blacklist.
2. Highlight a desired contact, and then press Option.
3. Select Add to Contact.
A message is displayed on the LCD screen:
4. Press OK.
Adding a contact to the local directory is configurable via web user interface at the path
Directory->Local Directory.
Mobile Contacts
After your Bluetooth-enabled mobile phone is paired and connected, you can temporarily
synchronize mobile phone contacts. The mobile phone contacts will be imported to your IP
phone under Mobile Contacts directory. You can add mobile contacts to the local directory or
blacklist, but you cannot add a contact to Mobile Contacts directory on your IP phone.
For more information, refer to Syncing the Mobile Contacts to the IP Phone.
Note
Adding a Contact to the Local Directory
1. Navigate to Menu->Directory->Mobile Contacts.
2. Highlight a desired contact, and then press Option.
3. Select Add to Contact.
If you disconnect the Bluetooth-enabled mobile phone from IP phone or disable the IP phone to
sync phone contacts, the mobile contacts will not display.

Yealink T5 Series Specifications

General

Brand	Yealink
Model	T5 Series
Category	IP Phone
Language	English