User Guide for T5 Series IP Phones
80
Configuring a Call Park Key
You can park a call directly by pressing the call park key during a call.
Procedure:
1. Navigate to Menu->Features->DSS Keys, and then select a desired line key.
2. Select Key Event from the Type field.
3. Select Call Park from Key Type field.
4. (Optional.) Select the desired line from the Account ID field.
Check with your system administrator if it is necessary.
5. (Optional.) Enter the string that will display on the LCD screen in the Label field.
6. (Optional.) Enter the park destination number or call park code you want to park the call to
in the Value field.
7. (Optional.) For the SIP-T52S IP phone, enter the string that will appear on the LCD screen in
the Short Label field.
8. Press Save.
Note
Configuring a Park Retrieve Key
You can retrieve a parked call directly by pressing the park retrieve key when the phone is idle.
Procedure:
1. Navigate to Menu->Features->DSS Keys, and then select a desired line key.
2. Select Retrieve Park from the Type field.
3. (Optional.) Select a desired line from the Account ID field.
Check with your system administrator if it is necessary.
4. (Optional.) Enter the string that will display on the LCD screen in the Label field.
5. (Optional.) Enter the parked call destination number or retrieve code in the Value field.
6. (Optional.) For the SIP-T52S IP phone, enter the string that will appear on the LCD screen in
the Short Label field.
7. Press Save.
Note
If the Value field is left blank, the Call Park key performs the same as the Park soft key during a
call.
If the Value field is left blank, the Park Retrieve key performs the same as the Retrieve key on
the dialing screen.
To Next Page
Loading...
Need help?
General
