Options and accessories
Remote control
Wall-mounted remote control unit with keyboard for cool/heat and ON/OFF functions. Includes power
supply, alarm and cool/heat LEDs. Maximum cable length: 50 m.
Remote terminal
For total access and control of the system by means of the display and buttons. It allows for selection of
cool, heat and off functions. Operating parameters can also be modified and the system can also be
supervised. Can be installed at a maximum distance of 1040 m.
BMS connections
By means of a serial board, it is possible to connect the system to a standard RS485 monitoring network.
low ambient temperature kit (YLCA 5 to 15)
Includes a pressure transducer to control condensation pressure at low ambient temperatures (-18 °C).
This component is standard in models YLCA 20 to 27 and YLHA PLUS 5 to 27.
High pressure fans
Inertia tank
With or without built-in auxiliary heater.
User manual
1
General description of the unit 1.1
5
To Next Page
Loading...
Need help?
General
