Zte H1600 User Manual

SJ-20210621164956-008 | 2022-09-01(R1.3)
57
5 Configure the Local Network
Figure 5-14 WiFi SSID IsolationWiFi SSID IsolationPage
2. Click On and then click the Apply button to enable the WiFi SSID isolation function.
5.3 Configure the LAN(IPv4)
The section describes how to configure LAN(IPv4).
The relevant information of Internet status includes Allocated Address(DHCP), DHCP
Server, DHCP Binding and Port Control.
Check the Allocated Address(DHCP)
1. On the main page of the ZTE H1600, select Local Network > LAN > IPv4 to open
the IPv4 page.
2. Click Allocated Address(DHCP) to view the allocated addresses, see Figure 5-15.
Figure 5-15 Allocated Address(DHCP) Page
3. Click Refresh to refresh the informations.
Configure the DHCP Server
1. Click DHCP Server to open the configuration, see Figure 5-16.
Steps

Zte H1600 Specifications

General

Brand	Zte
Model	H1600
Category	Gateway
Language	English