ZTE H1600 Maintenance Management Guide
3.
Click Apply button to apply the changes.
Configure the URL filter
1.
Click URL Filter to open the URL filter page, see Figure 4-16.
Figure 4-16 URL Filter Page
2.
Configure the URL filter configuration parameters, see Table 4-8.
Table 4-8 Parameter Descriptions for the URL Filter
3.
Click Apply button to apply the changes.
4.4.2
Configure the Local Service Control
The section describes how to configure local service control, for example, the service
type of some address segments from the WAN interface or LAN interface is set to ac-
cept or discard..
Configure the Service Control-IPv4
1.
On the main page of the ZTE H1600, select Internet > Security > Local Service
Control to open the Local Service Control page.
2.
Click Service Control-IPv4 to open Service Control-IPv4 page, see Figure 4-17.