Zte H1600 User Manual

60
SJ-20210621164956-008 | 2022-09-01(R1.3)
ZTE H1600 Maintenance Management Guide
Figure 5-18 Port Control
2. Configure the port control parameters.
⚫ Click All On to select all ports.
⚫ Click All Off to cancel all ports.
3. Click Apply button to apply the changes.
5.4 Configure the Route
5.4.1 Configure the Routing(IPv4)
The section describes how to configure routing(IPv4), which provides the parameters of
route(IPv4) configuration features.
The relevant information of Internet status includes Routing Table, Static Routing and
Policy Routing.
Before configuring routing(IPv4), make sure that the IPv4 WAN connection is created.
Check the Routing Table
1. On the main page of the ZTE H1600, select Local Network > Routing > IPv4 to
open the Routing(IPv4) page.
2. Click Routing Table to view the routing table, see Figure 5-19.
Prerequisite
Steps

Zte H1600 Specifications

General

Brand	Zte
Model	H1600
Category	Gateway
Language	English