130
CTIA Requirements
• Do not disassemble or open, crush, bend or deform, puncture or shred.
• Do not modify or remanufacture, attempt to insert foreign objects into the battery,
immerse or expose to water or other liquids, expose to re, explosion or other
hazard.
• Only use the battery for the system for which it is specied.
• Only use the battery with a charging system that has been qualified with the
system per CTIA Certication Requirements for Battery System Compliance to
IEEE 1725. Use of an unqualied battery or charger may present a risk of re,
explosion, leakage, or other hazard.
• Do not short circuit a battery or allow metallic conductive objects to contact
battery terminals.
• Replace the battery only with another battery that has been qualified with the
system per this standard, IEEE-Std-1725. Use of an unqualified battery may
present a risk of re, explosion, leakage or other hazard.
• Promptly dispose of used batteries in accordance with local regulations.
• Battery usage by children should be supervised.
• Avoid dropping the phone or battery. If the phone or battery is dropped, especially
on a hard surface, and the user suspects damage, take it to a service center for
inspection.
• Improper battery use may result in a re, explosion or other hazard.
• The phone shall only be connected to CTIA certified adapters, products that
bear the USB-IF logo or products that have completed the USB-IF compliance
program.
To Next Page
Loading...
Need help?
General
