15
NOTE:
Some applications may require a microSDHC card to work normally or may store
certain data on it. Therefore, it is recommended that you keep a microSDHC card
installed and not remove or replace it randomly.
3. Close the microSDHC card plug.
Charging the Battery
Your phone’s battery should have enough power for the phone to turn on, find a
signal, and make a few calls. You should fully charge the battery as soon as possible.
If the battery is low, there will be a pop-up message on the screen. As you charge
your phone, the screen will tell you the exact battery level each time you wake up
your phone.
WARNING!
Use only ZTE-approved chargers and cables. The use of unapproved accessories
could damage your phone or cause the battery to explode.
1. Connect the adapter to the charging jack. Ensure that the adapter is inserted with
the correct orientation. Do not force the connector into the charging jack.
To Next Page
Loading...
Need help?
General
