To Next Page

To Previous Page

ZXHN H3600 Maintenance Management Guide

Table 5-16 Parameter Descriptions for the DMZ

Parameter Description

DMZ Switch Enable the DMZ host function.

LAN Host The IP address or the MAC address of the computer at the LAN

side.

2. Click Apply button to apply the changes.

5.4.6 Configure the Port Forwarding

This procedure introduces how to configure Port Forwarding so that a computer from

the external network can access the LAN-side server through the WAN connection. Port

Forwarding provides the parameters of Port Forwarding configuration features.

If you have local servers for different services and you want to make them publicly ac-

cessible, you need to specify the port forwarding policy. With NAT applied, it translates

the internal IP addresses of these servers to a single IP address that is unique on the In-

ternet.

To the Internet users, all virtual servers on your LAN have the same IP Address. This IP

Address is allocated by your ISP. This address should be static, rather than dynamic, to

make it easier for Internet users to connect to your servers. However, you can use dy-

namic DNS feature to allow users to connect to your virtual servers by using a URL, in-

stead of an IP address.

Steps

1. On the main page of the ZXHN H3600, select Internet > Security > Port Forward-

ing to the Port Forwarding page, the page see Figure 5-24.

40 SJ-20201203151144-003 | 2021-06-16(R1.0)

Questions and Answers:

Need help?

Do you have a question about the Zte ZXHN H3600 and is the answer not in the manual?

Zte ZXHN H3600 Specifications

General