To Next Page

To Previous Page

6 Configure the Local Network

Steps

1. On the main page of the ZXHN H3600, select Local Network > DMS/DLNA to open

the DMS/DLNA page, see Figure 6-25.

Figure 6-25 DMS/DLNA

2. Enable the DMS/DLNA function, and specify the path storing the media files. For a

description of the parameters, refer to Table 6-18.

Table 6-18 Parameter Descriptions for the DMS/DLNA

Parameter Description

DMS Click On to enable the DMS function.

Click Off to disable the DMS function.

DMS Name To create a DMS, enter the name of the DMS.

Library Rescan

Method

Library rescan method that the device supports. Normally, it is set to Auto.

Media Source1–

Media Source4

By default, the media source is /mnt, that is the root directory of the USB de-

vice. You can change the root directory to other directory of the USB storage

device.

3. Click Apply button to apply the changes.

6.8 Configure the Samba Service

The procedure provides the parameters of samba configuration features.

Steps

1. On the main page of the ZXHN H3600, select Local Network > Samba Service to

open the Samba Service page, see Figure 6-26.

SJ-20201203151144-003 | 2021-06-16(R1.0) 69

Questions and Answers:

Need help?

Do you have a question about the Zte ZXHN H3600 and is the answer not in the manual?

Zte ZXHN H3600 Specifications

General