To Next Page

To Previous Page

ZXV10 W615 User Manual

38 Confidential and Proprietary Information of ZTE CORPORATION

2. Configure the parameters. Refer to the following table.

Parameter Description

Network Card Select the network card for which automatic channel

adjustment is to be configured.

Enable Channel

Auto-Switch

Enables or disables the automatic frequency adjustment

function.

Adjustment Type Supports two types: Adjust On Startup and Adjust

Periodically.

RSSI Threshold Specifies the signal strength threshold. The value range

is -90 dBm to 10 dBm. The default value is -30 dBm.

Cycle Period Specifies the interval of channel adjustment. The value

range is 1 to 1440 minutes. The default value is 30

minutes.

Duration Specifies the duration of channel adjustment. The value

range is 0 to 3600 seconds.

3. Click Submit.

—END OF STEPS—

Setting Wireless Mode

This section describes how to set wireless modes for the two network cards of

Questions and Answers:

Need help?

Do you have a question about the Zte ZXV10 W615 and is the answer not in the manual?

Zte ZXV10 W615 Specifications

General