54
Devices menu
"Profiles" menu
When the handset is delivered it has four profiles with characteristic settings pre-programmed for
the "intended purpose". A fifth profile is available for further settings. You can change all profiles
and rename them if required.
Select
No profile No profile can be used with this setting. The settings you select apply.
Normal Parameters for "normal" use are configured in this profile.
Headset Parameters for using a headset are preset in this profile.
Meeting Parameters for using the handset during a meeting are preset in this profile.
Loud Parameters for use in a particularly loud environment are preset in this profile.
<Profile 05>
This profile is available for your own use.
Settings Choose one of the profiles to make changes.
Profil name
Change the name of the profile if required.
Ringer volume
Set your preferred ringer volume (off, rising, 1...7).
Ringer device
Configure where or how the ringer should be signalled (loudspeaker, headset,
vibration alarm).
Ringer typeSelect whether the ringer should ring once or repeatedly.
Key click Switch the key click on or off.
Noise detection
Switch the automatic noise detection for a louder ringer on or off.
Loud environment
Adapt the speech quality in a loud environment.
To Next Page
Loading...
Need help?
General
