AO2000 CONTINUOUS GAS ANALYZERS | OI/AO2000-EN REV. B 181
Standard configuration
Standard configuration
Various applications are factory-configured. These standard configurations
are based on
• standard input/output pin configuration and
• the available sample components
Some factory-configured applications require field linking of additional
function blocks.
Example: Limit value monitoring
The limit value monitoring application consists of a factory configured link
between
• Component measurement value, Hold, Limit monitor and Digital output
function blocks.
Grenzwert-
waechter
‘’
Komp.-
Messw.
‘’
Digital-
ausgang
‘’
Halteglied
‘’
Auto-
kalibrierung
‘’
Example: Measuring range switch-over/feedback signal
The measurement range switch-over/feedback application consists of a
factory-configured linkage between
• a Measuring range switch-over function block with several Digital input
function blocks and Component range function block, as well as
• a Range feedback function block with the same Component measuring
range function block and several Digital output function blocks.
Messber.-
um-
schaltung
‘’
Messber.-
rueck-
meldung
‘’
Digital-
ausgang
‘’
Komp.-
Messber.
‘’
Digital-
eingang
‘’
Digital-
eingang
‘’
Digital-
ausgang
‘’
To Next Page
Loading...
Need help?
General
