14 Introduction to the manual
Disclaimers
Generic disclaimer
The manufacturer shall have no obligation hereunder with respect to any product which (i)
has been improperly repaired or altered; (ii) has been subjected to misuse, negligence or
accident; (iii) has been used in a manner contrary to the Manufacturer's instructions; or (iv)
has failed as a result of ordinary wear and tear. All material in this manual is subject to
change without a further notice. The manual is intended as non-contractual document.
Cybersecurity disclaimer
This product is designed to be connected to and to communicate information and data via
a network interface. It is the sole responsibility of the customer to provide and continuously
ensure a secure connection between the product and customer network or any other
network (as the case may be). The customer shall establish and maintain any appropriate
measures (such as, but not limited to, the installation of firewalls, application of
authentication measures, encryption of data, installation of anti-virus programs and so on)
to protect the product, the network, its system and the interface against any kind of
security breaches, unauthorized access, interference, intrusion, leakage and/or theft of
data or information. FIMER and its affiliates are not liable for damages and/or losses
related to such security breaches, any unauthorized access, interference, intrusion,
leakage and/or theft of data or information.
To Next Page
Loading...
Need help?
General