Maintenance 27
6
Maintenance
This chapter contains preventive maintenance instructions of the inverter. The instructions
given here are intended for personnel who are trained and certified by FIMER to perform
these tasks.
Maintenance intervals
If the inverter is installed in a suitable environment, it requires little maintenance. The
tables list the routine maintenance intervals recommended by FIMER. The recommended
maintenance and component replacement intervals are based on the specified operational
and environmental conditions. Refer to the Hardware manual for specified operational and
environmental conditions.
For more information on inverter maintenance, contact your local FIMER Service
representative.
Descriptions of symbols
Action Description
I Visually inspect and do maintenance if it is necessary.
R Replace the component.
To Next Page
Loading...
Need help?
General