CodeName
Manuals and quick guides for I/O extension modules,
fieldbus adapters, etc.
See www.abb.com/drives/documents for all manuals on the Internet.
Terms and abbreviations
DescriptionTerm
Directives 2014/34/EU and 1999/92/EC are commonly re-
ferred to as the ATEX directives (from "Atmosphères Explos-
ibles")
ATEX
Classification of the safety-related parts of a control system
in respect of their resistance to faults and their subsequent
behavior in the fault condition, and which is achieved by the
structural arrangement of the parts, fault detection and/or by
their reliability. The categories are: B, 1, 2, 3 and 4. (EN ISO
13849-1)
Cat.
Common cause failure (%) (EN ISO 13849-1)CCF
Diagnostic coverage (EN ISO 13849-1)DC
Digital inputDI
Direct torque control, a motor control methodDTC
Electromagnetic compatibilityEMC
An IEC term used in the context of explosive atmospheres
(IEC 60079)
Ex
Type of protection, flameproof enclosures (EN/IEC 60079-1)Ex d
Types of protection, increased safety (EN/IEC 60079-7)Ex eb, Ex ec
Motors used in explosive atmospheresEx motors
Optional I/O extension adapterFEA-03
Optional ATEX-certified thermistor protection module for po-
tentially explosive atmospheres
FPTC-02
Optional pulse encoder interface module for safety encoderFSE-31
Safety functions module which supports the FSE-31 module
and the use of safety encoders
FSO-21
Safety functions module which does not support the use of
encoders
FSO-12
Hardware fault tolerance (IEC 61508)HFT
18 Introduction to the manual
To Next Page
Loading...
Need help?
General
